CV640C

The CV640C is a color version of our high-performance CV640 machine vision camera. On board color interpolation modes include YUV 4:1:1, YUV 4:2:2, RGB24, and RGB48. The camera can also output non-interpolated raw-bayer output for those situations where maximum framerates are required (less data on firewire).

NOTE: The CV640C has been discontinued. It is now available only so long as supplies last.

Sensor
  • 1/2" CMOS Bayer pattern color
  • 659 x 494 pixel resolution
  • Snapshot shutter
  • 9.9 x 9.9 um pixel
Color Modes
  • RGB 24
  • RGB48
  • YUV 4:1:1
  • YUV 4:2:2
  • Mono 8
  • Mono 16
User Controls
  • Exposure control (10us to 5s.)
  • Gain and Offset
  • SMB Trigger input/output (TTL)
  • Trigger input/output (12-pin Hirose)
  • Arbitrary Region of Interest
  • Bit depth (8 or 10 bits)
  • Extended Dynamic Range mod
Frame Rates
  • 120 fps at VGA resolution (640 x 480) on CVS or non-Windows.
  • 100 fps on Windows
Computer Hardware Interface
  • two IEEE-1394a ports
  • 2nd Firewire port can be used for daisy chaining camera in multi-camera situations
  • Upload firmware updates via firewire port
Mechanical Interface
  • Various mounting holes (4xM4 botton, 4xM3 face, 2xM4 top)
Optical Inteface
  • 1/2" C-mount (lens not included)
Strobe/Flash Control
  • Trigger out signals (TTL)
  • Programmable output signals
Triggering
  • Multiple trigger inputs
  • Trigger outputs (trigger thru, trigger-ready, expose)
  • Programmable trigger modes (active high, active low, edge, level expose)
  • TTL level SMB trigger input/output
  • Daisy chain SMB trigger for multiple cameras
  • Standard cabling for SMB trigger
  • Alternate Trigger I/O on 12-pin Hirose
  • Software tools to assist advanced trigger setups
  • Custom Virtual Instruments for advanced trigger setups
  • Isolated power output for limit-switch, proximity switch and other simple trigger circuits
  • Internal controls for programmable delays
Software Compatibility
  • DCAM 1.3 (IIDC V1.3 & 1.31) - format 7 and format 0
  • National Instruments Labview
  • NI Compact Vision System
  • Matrox 4-Sight II
  • Compatible with all DCAM compliant hardware/software
  • MS Windows, Linux
  • Prosilica SDK provides advanced capabilities and tools
Optional accessories
  • 1/4-20 tripod mount
  • power supply
  • industrial firewire cable
  • IEEE-1394a PCI Card
Home | Products | Support | Company | Contact | NI Zone | Members